New Builds in Liphook — Programme-Led Delivery from Ground to Finish
From first shovel to final snag, we run new builds with a clear programme, coordinated trades and rigorous QA. We front-load design queries, lock down long-lead items and sequence groundworks, frame, envelope and M&E so crews aren’t tripping over each other. Temporary works, safety and compliance are built into the plan, and you get photo updates, cost control and a calm site. The result is a straight, warm, dry structure that hands over on time—with the paperwork to prove it. Our new builds in Liphook are managed with the same discipline, ensuring a smooth journey from design to completion.
Pre-construction & Procurement
We review drawings for buildability, coordinate architects/engineers/specifiers and value-engineer where it helps without downgrading performance. A risk register, procurement schedule and look-ahead meetings keep decisions ahead of site progress. Trade packages are let to capable, insured teams with clear scopes, QA requirements and programme dates. In Liphook, where plots are often tight and services constrained, early coordination avoids expensive delays.
Design Coordination & Schedule
We issue RFIs early, freeze key details and publish a critical-path programme covering surveys, groundworks, superstructure, envelope, first/second fix and commissioning. Long-lead items (frames, windows, MVHR, heat pumps, kitchens) are ordered to meet dates; inspections and Building Control milestones are slotted in so nothing stalls the build.
Groundworks & Drainage
Setting-out uses tight datums and control lines. We manage excavation, temporary works and spoil, then form foundations to ground conditions and engineer’s design. Drainage is laid with correct falls, tested, and tied into manholes; ducts and sleeves are positioned for future services. Slabs/oversites are cast level, insulated and damp-protected, ready for frames and first fix.
Foundations, Slabs & Services
Strip, trench-fill, pads or rafts are constructed to spec with proper bearing and reinforcement. Oversites include DPM/DPC interfaces, insulation, vapour control and service penetrations with sleeves. We set ducts for power, water, data and EV, leave draw cords and record as-builts so future trades land exactly where intended.
Superstructure
Whether masonry, timber frame or steel, we build plumb and true with tolerances that make later trades straightforward. Floors are stiff and level; stair openings are trimmed; fire-stopping is planned, not patched. Structural fixings are documented and inspected before they disappear behind linings. Many Liphook clients choose energy-efficient frames, and we ensure the details support long-term performance.
Masonry/Frame, Steel & Floors
Cavity masonry gets clean cavities, correct ties and movement joints; timber or SIP frames are set square and braced. Steel is installed on specified padstones, bolted and fire-protected. Floors (precast, cast in situ or timber) are levelled and tied, with deflection controlled to keep ceilings crack-free.
Envelope & Roofing
We create a warm, airtight shell with disciplined detailing at junctions. Roofs are pitched or flat to spec with correct ventilation or warm-roof build-ups. Rainscreen or brick façades align cleanly around openings; penetrations are sealed to maintain the air-tightness line.
Air-tightness, Insulation & Cladding
Targets are agreed, then achieved with continuous insulation, taped membranes and smart vapour layers. Cavity barriers and fire stopping meet regulations; cladding systems are installed to manufacturer detail with drained/ventilated cavities. We test (blower door) and fix snags before linings hide the work.
Windows, Doors & Glazing
Frames are set level and packed into structure, not just plasterboard. We check U-values, safety glass zones and security specs; sills, trays and sealant systems are detailed for long life. Trickle vents and shading are planned for comfort; thresholds are flush where practical and weather-tight where they must be.
M&E First Fix to Commissioning
Services are coordinated in 3D where helpful: risers sized, routes agreed, penetrations sealed. Electrics, plumbing and HVAC are pressure/insulation tested; heating systems are flushed, balanced and commissioned. Controls are labelled and simple to use, with handover training for owners. On Liphook projects, we also focus on integrating renewables like solar and heat pumps for long-term savings.
Interiors, QA & Handover Pack
Walls are straight, corners sharp and reveals consistent. Joinery is fitted with tight gaps; floors are flat and finished cleanly through doorways. We work through staged snag lists, then deliver an O&M pack—certificates, warranties, paint codes, as-builts and maintenance guidance—so you can run the home confidently.
Why Choose DM Jones Contractors
- ✓ Programme-led delivery with early RFIs, locked details and clear milestones.
- ✓ Solid groundworks and accurate set-out for level slabs and true frames.
- ✓ Plumb, square superstructure—masonry or frame—with inspected fixings.
- ✓ Warm, airtight envelope: tested, documented and built to last.
- ✓ Specified windows/doors installed correctly with tidy, weather-tight details.
- ✓ Coordinated M&E to commissioning, labelled and easy to operate.
- ✓ Clean finishes, photographed QA and a complete handover pack.
- ✓ Straightforward pricing, respectful sites and dependable communication.
Discuss Your New Build
Send drawings (or a brief with footprint and storeys), site address and any planning/engineering info. Tell us your target start and priorities (fabric, renewables, finishes). We’ll review for buildability, outline a programme and procurement plan, and provide a clear, itemised proposal with options for envelope, services and specification. For Liphook homeowners, we can also share case studies of recent new builds locally, helping you see what’s possible.
