Kitchen Refurbishment in Haslemere — Layout, Services & Worktops
A great kitchen is planned, not improvised. We start with precise measurements and a practical layout, then coordinate structure, first-fix services and cabinetry so everything lands where it should. Appliances are vented correctly, worktops are templated for a perfect fit and finishes are protected as trades overlap. You get a clean programme, daily communication and a tidy handover—leaving you with a kitchen that looks sharp, works smoothly and is easy to keep that way. Many of our kitchen refurbishments are completed in Haslemere homes where layouts often need creative solutions.
Measure, Design & Workflow
We survey with lasers, check wall plumb and floor levels, and record every service point and window height. From this we produce a layout that respects prep, cook and clean zones, door swings and circulation. Storage is planned for what you actually use—pan drawers, pull-outs and bins—while clearances for ovens, fridges and dishwashers are built in. Before ordering, we confirm appliance models, handle heights and lighting positions so the design reads as one, not a collection of parts. This measured approach is especially valuable in Haslemere properties, where room proportions vary widely between period and modern builds.
Plans, Zones & Appliances
We map work triangles or modern zone planning, keep tall housings grouped neatly and allow ventilation spaces per manufacturer guidance. Extract routes, socket heights, water feed/ wastes and island power are set on drawings. Clearances at ovens, hob centres to edges, and splashback heights are agreed up front, avoiding awkward last-minute shifts.
Structural Changes
Opening rooms transforms light and flow. Where knock-throughs are needed, we coordinate engineer’s calcs, Building Control and any party wall notices. Works are sequenced for minimum disruption: protect floors, prop safely, cut out cleanly, install steels, then make good ceilings and floors so finishes run through without clumsy steps or trims. In Haslemere, where many kitchens back onto gardens, knock-throughs often include patio doors or open-plan layouts for more light.
Knock-throughs, RSJs & Lintels
Steels are lifted to level, set on specified padstones with correct bearings and bolted where detailed. We box-in neatly, fireline as required and blend soffits into the scheme. Lintels over new openings are sized and packed correctly, and we stitch floors/ceilings either side so lines stay straight for the kitchen install.
First Fix Electrics & Plumbing
Services are routed early and tested before walls close. We set dedicated cooker circuits, plentiful socket drops, switched spurs for appliances, and layered lighting feeds. Plumbing is pressure-tested, wastes fall properly and isolation valves are where you can actually reach them. Gas alterations are undertaken by Gas Safe engineers and certified at handover.
Lighting Circuits, Sockets & Gas
Task lighting under cabinets, ambient ceiling circuits and feature pendants are switched sensibly, with dimming where useful. Islands get floor-fed power for hobs or pop-ups. Circuits are RCD/RCBO protected and labelled. Gas pipe sizing, tightness testing and relocation of meters/appliances are completed to current regs, with certificates provided.
Cabinetry & Installation
Cabinets go in square, level and secure. We laser the datum, pack accurately and fix into structure, not just plasterboard. Uneven walls are scribed, fillers are centred and door reveals are adjusted for consistent gaps. Tall units are anti-tipped, appliances slide in on true floors and all doors/drawers are tuned for smooth, quiet operation.
Levelling, Scribing & Plinths
Bases are levelled across runs so worktops sit dead flat; end panels and fillers are scribed tight with clean edges. Plinths are clipped for easy access and vented where appliances need airflow. Cornice, pelmet and light-rail are mitred accurately so lines read continuous around the room.
Worktops & Splashes
Stone and solid surfaces are templated after cabinets are fixed, ensuring precise cut-outs and overhangs. Undermount sinks, drainer grooves and hob centres are positioned to your workflow, and splashbacks/upstands are set to consistent lines. Joints are minimised and colour-matched; support is added at spans and breakfast bars for a firm feel.
Template, Fit & Seals (Quartz/Wood)
Quartz/stone is dry-fitted, then bonded and sealed with neat, colour-matched joints; sinks are clipped and sealed from below. Solid wood is oiled on all faces, fixed with slotted brackets for movement and gapped correctly at walls. We leave care notes for cleaning, heat and resealing so the finish lasts.
Flooring & Decoration
Subfloors are levelled and prepped for your chosen finish—LVT, porcelain or engineered wood—with decoupling where required. Thresholds are flush and neat, and skirtings/architraves are refitted cleanly. Walls are mist-coated and finished after second-fix to a crisp edge, with silicone/caulk applied sparingly and straight.
Why Choose DM Jones Contractors
- ✓ Measured surveys, practical layouts and appliance-ready drawings.
- ✓ Safe, certified structural work with clean making-good.
- ✓ Proper first-fix: labelled electrics, tested plumbing and Gas Safe certification.
- ✓ Cabinetry installed dead level with tight scribes and tuned reveals.
- ✓ Professional worktop templating, neat joints and durable sealing.
- ✓ Floors, paint and silicone finished cleanly with protection throughout.
- ✓ Tidy sites, clear timelines and itemised, transparent pricing.
Get a Kitchen Quote
Send your room sizes (or a plan), appliance list and a few photos of the space. Tell us your preferred finishes and any knock-throughs you’re considering. We’ll firm up the layout, confirm services and structure, and return a clear, itemised quotation with programme and options for worktops, lighting and flooring. If you’re based in Haslemere, we can also show you recent local kitchen refurbishments for inspiration and reassurance.
